Gigabit 4 port PoE extender / Splitter, POE-EX2005, 60W

  • $89.99
  • Save $20


Gigabit 4 port PoE extender / Splitter, POE-EX2005, 60W, NO Power required. 

Description

Ethernet and PoE connections both restrict cable distances to 100 meters between network ports. To overcome this distance limit, network installers can simply connect an PoE Extender in-line with the Cat-5e or Cat-6 calbe.

With Gigabt PoE Extender, PDs (such as IP Security Cameras, VoIP telephones, wireless access points) can be installed at greater distances than 100 meters from one another. By connecting PoE Extender for every extra 100 meters of cable, both Ethernet and PoE can be extended to 200 meters, 300 meters, or even greater distances, depending on PDs power required and power source.

Gigabit PoE Extender does not require any additional power supply and the connected PDs is fed by an single PoE switch or mid-span, which simplifies installation. PoE Extender offers Three Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is main-tained.PoE in connection PoE Swith, 12.36 or 45.78 powered support, support IEEE802.3af & at  the power supply, PoE out for the supply terminal 2 Gigabit, PoE total power can reach 30w (PoE Switch need to provide IEEE802.3at power)

Features

  • Compatible with IEEE802.3af and IEEE802.3at
  • Extends the range of PoE and Ethernet an additional 100 meters
  • No additional power supply is required
  • Automatically detects and protects PoE equipments from being damaged by incorrect installation
  • Full-rate network throughout the whole extended distance
  • Wall-Mountable design
  • Easy plug-and-play installation
  • EMI standards complies with FCC, CE class B

Specifications

Item

Description

No. of channels

1(PoE IN) into 4(PoE OUT)

Pass Through Data Rates

10/100/1000 Mbps half/full duplex

Power over Ethernet input

Pin Assignment and Polarity:

Both 1/2 (-), 3/6 (+) and  7/8 (-), 4/5 (+)

Power over Ethernet Output

Pin Assignment and Polarity:

1/2 (-), 3/6 (+)

Output Power: up to 22W

Indicators

LED indicators are located on the RJ45 connector

Power indicator: PoE enabled

Powered success:Power

Network indicator: Link/Act

Connectors

Shielded RJ-45, EIA 568A and 568B

Network cables

Shielded category 5 (or higher)

Dimensions

119mm x 85mm x 28mm

Mounting

Wall of shelf

Environment

Indoor or Outdoor

Environmental Conditions

Operating Ambient Temperature:-10 to 45℃

Operating Humidity:

Maximum 90%, Non-condensing

Storage Temperature:-30 to 70℃

Storage Humidity:

Maximum 95%, Non-condensing

Regulatory Compliance

IEEE 802.3af (PoE), IEEE 802.3at (PoE+)

 

 

 

Application

 

Maximum Distances for Power Sources

Multiple PoE Extenders can be connected every 100 meters to obtain greater distances. The actual figures depend on operating conditions. The range is over 24 AWG or heavier Cat-5e or Cat-6 cable except where specified.

Examples for medium power PoE Devices (that are PoE Class 2, or require under 6 watts)

PoE Source

PoE switch (802.3af,Output voltages  50V)

15W mid-span (802.3af,Output voltages  50V)

PoE+ switch (802.3at,Output voltages 50V)

30W mid-span (802.3at,Output voltages 50V)

Maximum Distances

300m

300m

400m

400m

Examples for full power PoE Devices (that are PoE Class 0 or 3, or require under 12 watts)

PoE Source

PoE switch (802.3af,Output voltages  50V)

15W mid-span (802.3af,Output voltages  50V)

PoE+ switch (802.3at,Output voltages  50V)

30W mid-span (802.3at,Output voltages  50V)

Maximum Distances

200m

200m

300m

300m

 

Examples for PoE+ Devices (that are PoE Class 4 that under 22 watts, or 802.3at compliant)

 

PoE Source

PoE switch (802.3af,Output voltages  50V)

15W mid-span (802.3af,Output voltages  50V)

PoE+ switch (802.3at,Output voltages  50V)

30W mid-span (802.3at,Output voltages  50V)

Maximum Distances

Not applicable

Not applicable

200m

200m

 

 

 

QUESTIONS & ANSWERS

Ask a Question
  • Do you sell this as a PCBA only version? If so, what is the pricing for MoQ=100?

    Yes, of course, we are the manufacturer. 
    please contact me, philip@centropower.com .